PERECO OPP(ADHESIVE)TAPE PRODUCTION PLANT  YEAR 2014

 

 

Used second hand OPP(Adhesive)Tape Production Plant (Korean make, 2014)
1.OPP TAPE(ADHESIVE TAPE) PRODUCTION PLANT
Make:Pereco(Korea)
Manufacturing year:2014
 - COATER UNIT
COATER ROLL : ￠240 × L1500
KNIFE ROLL : ￠110 × L1500
COOLING ROLL : ￠350 × L1500
GUIDE ROLL : ￠90 × L1500
AIR CYLINDER : ￠100 × 50ST
GEARD MOTOR : 3HP
WORX PLATE, CHANNEL 12
- GRAVURE PRINTING
RUBBER ROLL : ￠150 × L1500
GUIDE ROLL : ￠110 × L1500
COOLING ROLL : ￠350 × L1500
GUIDE ROLL : ￠90 × L1500
AIR CYLINDER : ￠80 × 100ST
GEARD MOTOR : 0.4KW
DRY BOX
- UN-WINDER
RUBBER ROLL : ￠200 × L1500
GUIDE ROLL : ￠ 90 × L1500
AIR SHAFT : ￠75 × L1500
POWDER BRAKE : 20KG
- BACX COATING
COATING ROLL : ￠220
GUIDE ROLLL : ￠ 90
GEARD MOTOR : 0.4KW
-CHAMBER (7SET)
AIR CYLINDER : ￠100 × 300ST
STEAN HEATER : 150,000, 120,000,
               100,000Kal
HEAT EXCHANGE FAN 3 1/2#
EXHAUST FAN 3#
BELT DRIVING ROLL : ￠200
COOLING ROLL : ￠200
EXPANDER ROLL : ￠200
BELT TENSION ROLL : ￠200
WORM REDUCER : 100#
GEARD MOTOR : 10HP
GUIDE ROLL : ￠90
-JUMBO WINDER
FRAME CHANNEL 125
RUBBER ROLL : ￠120
MESH ROLL : ￠180, ￠120
POWDER CLUTCH : 20K
GUIDE ROLL : ￠90
AIR SHAFT : ￠75
BEVEL GUIDE
- 4-ROLL WINDER
FRAME STEEL : 20T
CHANNEL 125
SILICON ROLL : ￠120
TENSION ROLL, KNIFE CUTTING UNIT
 
2 MIXING ROLL 18"
 Make:Pereco(Korea)
Year:2014(
Bed frame(1SET) : W1650 × L3700
Chilled ROLL(2set) : 18"
Motor : 6p, 100HP
Reduction gear : 100HP

 3 Rubber cutter
Make:Pereco(Korea)
Year:2014
Base frame(1SET): W1100 × L150
Hydraulic cylinder ￠150 × L1100
 
4 Automatic cutter(4SET)
Make:Pereco(Korea)
Year:2014
Size : L1950 × H180
 
5 Slitter
Make:Daemyung(Korea)
Year:2014
Size : 2330L × 1500W × 1390H
Roller : 14000m/m(1SET)
UN-WINDER, WINDER,
 
6 Automatic packing machine
Make:Tukbyul(Korea)
Year:2014
Capacity : Max 180item/min.
 
7. 3"GRAVURE PRINTING
Make:Daemyung(Korea)
Year:2014
3-colors
Speed: 200M/min
- UN-WINDER
GUIDE ROLL: 320 × 1200(4EA)
            515 × 1200(1EA)
RUBBER ROLL: 440 × 1200(1EA)
             320 × 1100(1EA)
- UNIT1(3EA)
FRAME : 3200 × 900 × 3150(2SET)
GUIDE ROLL : 320 × 1200(7SET)
             280 × 1200(6SET)
RUBBER ROLL : 480 × 1130(1SET)
KNIFE(1SET), AIR SHAFT(2SET)
HEATER BOX : 860 × 200 × 800
-WINDER
FRAME : 900 × 40 × 3150(2SET)
TURRET :
GUIDE ROLL : 320 × 1200(9EA)
             540 × 1200(1EA)
RUBBER ROLL : 440 × 1200(1EA)
              320 × 1100(1EA)
-HEATING
HEATER(1SET), DUCT(1SET)
 
8. Mixer
Make:Jinhung(Korea)
Year:2014
Tank : 3TON × 5EA
Service tank : 7TON × 1EA
agitator : 3TOM × 1EA
 
9 SOLVENT RECOVERY PLANT
Make:Sanbon(Korea0
Year:2014
ABSORBER( ￠2600 × 7200L)
AMOUNT OF SOLVENT VAPOUR
: MAX 562kg(65M/min)
TEMPERATURE OF EXHAUST GAS: 80℃ ± 10℃
DENSITY OF EXHAUST GAS: 300ppm이하
VOLUME OF AIR FLOW : 800CMM
RECOVERY CAPACITY : 550kg
RECOVERY EFFICIENCY : 95% above
 
11 Gas boiler
MAKE:B and teck(Korea)
Year:2014
CAPACITY : 3,500kg/hr
DESIGN PRESSURE : 10kg/㎠
STEAM DRY MEASURE : 99% above
STEAM TEMPERATURE : STURATED STEAM

 

 

Ref. No. BPMB101865