- Category: Paper
PAPER MACHINE FOR CREPP PAPER TOWEL & INDUSTRIAL
PAPER MACHINE FOR CREPP PAPER TOWEL & INDUSTRIAL
Used second hand Paper machine for Crepp papers, towels and industrial cleaning papers 2250mm
working width:2250mm
grammage range:22 -55 gsm
tons per day:50tpd max
working speed:600 m/min
Double press, Yankee with gas heated hood and after dryer group.
Max. Speed 650 m/min.
Crêpe 5-15 %
Paper width on pope: Max. 2280 mm.
Grammage range: 22 – 55 gsm
Used second hand Paper machine for Crepp papers, towels and industrial cleaning papers 2250mm
working width:2250mm
grammage range:22 -55 gsm
tons per day:50tpd max
working speed:600 m/min
Double press, Yankee with gas heated hood and after dryer group.
Max. Speed 650 m/min.
Crêpe 5-15 %
Paper width on pope: Max. 2280 mm.
Grammage range: 22 – 55 gsm
Stock pump with stuffingbox and basisweight valve (BTG)
Primary cleaning low density stage 14 pcs with pump
Secundary cleaning stage low density 1 pc with pump
Headbox pump & First stage pump
Combinated primary and secundary whitewatertank
Primary screen:
Build Finck 1978
Type: K100L
Secondary vibrating screen:
Build Finck 1978
E 2/1.5
Headbox:
Build Voith 1983
Type: Single layer with aircushion
Slice width: 2350 mm.
Flow: 5900-14000 l/min.
Overhauled by Voith in 2003
Foundrinier:
Wire width/length: 15850 * 2465 mm.
Breast roll diameter/face: 545 * 2610 mm.
Leadrolls 4 pcs. Diameter/face: 230 * 2605 mm.
Wire driveroll with drive and gearbox
Hydraulic controlled guideroll
Foils 2 with ceramic covers
Con Low vac box
Brand Johnson foils 1984
Number of slots 8 with ceramic covers
Water separator pump
High vac box
Brand Trivac 2003
Number of chambers 3 with ceramic covers
Water separator pump
Pick-up unit (wire to felt) hydraulic controlled
Vacuumsystem with separatortanks & extraction pumps “Vacuum pump not included!”
Perssection with 2 presses
Suction pressroll:
Build Voith 1981
Diameter 790 mm 2 vacuum zones
Cover PU
Nipload 70kN/m hydraulic controlled
Lubrication bearings grease
Spare shell 1
Blind press:
Diameter 509 mm
Nipload 65 kN/m hydraulic controlled
Lubrication bearings grease
Spare Shell 1
Primary cleaning low density stage 14 pcs with pump
Secundary cleaning stage low density 1 pc with pump
Headbox pump & First stage pump
Combinated primary and secundary whitewatertank
Primary screen:
Build Finck 1978
Type: K100L
Secondary vibrating screen:
Build Finck 1978
E 2/1.5
Headbox:
Build Voith 1983
Type: Single layer with aircushion
Slice width: 2350 mm.
Flow: 5900-14000 l/min.
Overhauled by Voith in 2003
Foundrinier:
Wire width/length: 15850 * 2465 mm.
Breast roll diameter/face: 545 * 2610 mm.
Leadrolls 4 pcs. Diameter/face: 230 * 2605 mm.
Wire driveroll with drive and gearbox
Hydraulic controlled guideroll
Foils 2 with ceramic covers
Con Low vac box
Brand Johnson foils 1984
Number of slots 8 with ceramic covers
Water separator pump
High vac box
Brand Trivac 2003
Number of chambers 3 with ceramic covers
Water separator pump
Pick-up unit (wire to felt) hydraulic controlled
Vacuumsystem with separatortanks & extraction pumps “Vacuum pump not included!”
Perssection with 2 presses
Suction pressroll:
Build Voith 1981
Diameter 790 mm 2 vacuum zones
Cover PU
Nipload 70kN/m hydraulic controlled
Lubrication bearings grease
Spare shell 1
Blind press:
Diameter 509 mm
Nipload 65 kN/m hydraulic controlled
Lubrication bearings grease
Spare Shell 1
Felt cleaning station
HP - LP showers oscillation hydraulic controlled
2 uhleboxes 1 single 1 double slot
Felt tension control
Electropneumatic controlled
Yankee cilinder:
Build Voith year of manufacturing 1964
Cast-iron Plain inner surface
Diameter 3100 mm
Width of Yankee 3500 mm.
Operating steam pressure max. 5,0 barg
Metallization: Valmet Infinicote-2 Year of the metallization 2016
Drive and gearbox
Steam plant
Gas hood:
Build Spooner 1971
2 Burners Flameco/Eclipse natural gas
Circulation fans WE & DE
Heat recovery gas hood and dryer group
Build Langbein & Engelbracht 1986
Steam heater
Heat exchangers air/air by glass tubes
Stand alone broke pulper
Build Robopaper, pulper fed by conveyor
Machine drives:
Type: DC
Brand: BBC/ABB
Cooling drives fan & heat exchangers
Afterdryer Group with 6 dryers
4 groups (1e under 1e upper 2e under 2e upper)
Dryers diameter x width 1800 mm x 2500 mm.
Hydraulic controlled guiderolls
Steam plant with separators and controlls.
Spare dryer new 2004 for afterdryer
Popereel hydraulic controlled
Slitting system with trim extracting ventilator
Manual shaft extractor
Spare fabrics for afterdryer
Machine control panel
Hydraulic aggregates and lubrication unit
Major rebuilts:
– 1986: After dryer group 6 cylinders (Gustaf Reinhard u Co)
– 2006: Installation of Headbox (Voith 1983) overhauld by Voith
– 2006: New foils Lovac & highvac.
– 2016: Yankee’s new metalization by Valmet infinicote-2
Available equipment
• headbox (Voith)
• main frame: wire, felt, Yankee section (carbon steel, stainless steel)
• wire and felt after dryer all guiding and drive rolls
• foils and suction boxes from wire’s dewatering section (ceramic)
• pick up unit (wire to felt)
• blind press
• suction press incl. drive gearbox
• Yankee cylinder (Voith cast iron with metalization Valmet Infinicote-2)
• cleaning, and crepping Yankee’s doctor blades (carbon steel ceramic crepingblades )
• Yankee wet and dry hood (spooner)
• heat recovery & fans burners
• Afterdryer group
• pope reel incl. drive gearbox slitting unit
• tambour expandeble shafts 6 inch ‐ 4 pcs shaft extractor
• drive controll system (DC BBC/ABB), including wire, felt, Yankee, after dryer Group, pope
HP - LP showers oscillation hydraulic controlled
2 uhleboxes 1 single 1 double slot
Felt tension control
Electropneumatic controlled
Yankee cilinder:
Build Voith year of manufacturing 1964
Cast-iron Plain inner surface
Diameter 3100 mm
Width of Yankee 3500 mm.
Operating steam pressure max. 5,0 barg
Metallization: Valmet Infinicote-2 Year of the metallization 2016
Drive and gearbox
Steam plant
Gas hood:
Build Spooner 1971
2 Burners Flameco/Eclipse natural gas
Circulation fans WE & DE
Heat recovery gas hood and dryer group
Build Langbein & Engelbracht 1986
Steam heater
Heat exchangers air/air by glass tubes
Stand alone broke pulper
Build Robopaper, pulper fed by conveyor
Machine drives:
Type: DC
Brand: BBC/ABB
Cooling drives fan & heat exchangers
Afterdryer Group with 6 dryers
4 groups (1e under 1e upper 2e under 2e upper)
Dryers diameter x width 1800 mm x 2500 mm.
Hydraulic controlled guiderolls
Steam plant with separators and controlls.
Spare dryer new 2004 for afterdryer
Popereel hydraulic controlled
Slitting system with trim extracting ventilator
Manual shaft extractor
Spare fabrics for afterdryer
Machine control panel
Hydraulic aggregates and lubrication unit
Major rebuilts:
– 1986: After dryer group 6 cylinders (Gustaf Reinhard u Co)
– 2006: Installation of Headbox (Voith 1983) overhauld by Voith
– 2006: New foils Lovac & highvac.
– 2016: Yankee’s new metalization by Valmet infinicote-2
Available equipment
• headbox (Voith)
• main frame: wire, felt, Yankee section (carbon steel, stainless steel)
• wire and felt after dryer all guiding and drive rolls
• foils and suction boxes from wire’s dewatering section (ceramic)
• pick up unit (wire to felt)
• blind press
• suction press incl. drive gearbox
• Yankee cylinder (Voith cast iron with metalization Valmet Infinicote-2)
• cleaning, and crepping Yankee’s doctor blades (carbon steel ceramic crepingblades )
• Yankee wet and dry hood (spooner)
• heat recovery & fans burners
• Afterdryer group
• pope reel incl. drive gearbox slitting unit
• tambour expandeble shafts 6 inch ‐ 4 pcs shaft extractor
• drive controll system (DC BBC/ABB), including wire, felt, Yankee, after dryer Group, pope
Ref. No. BPMB121843