BELOIT FOURDRINIER PAPER MACHINE, 58" (4.00M) Width, Capacity 250- 350 TPD

Equipped With:
One (1) used 158" (4.0m) Beloit Fourdrinier paper machine, Basis weights range from 45 to 80 lb (per 3300 sq ft.),production rates range from 250 to 350 tons per day at the reel, Coat weights range from 2.5 to 24 lbs, depending on grade, Speeds range from 1400 ft/min to 2000 ft/min, depending on grade.
Runs standard offset C2S grades, plus uncoated freesheet, and envelope,Produces 93 grades with Dull, Dull-SG, Gloss, Matte, Smooth and Wove finishes.Capable of running up to 30% PCW furnish

Consists of:
Wet end:
160" pond width Voith Master Jet F dilution headbox with central distributor and 63 zone dilution profiling
Wet end is controlled with ABB and Delta V DCS systems
170" wide fourdrinier with (8) multiple-foil drainage units, (2) lo-vac units, and (3) flat boxes with vacuum control system,Multi-component retention and drainage system to control anionic trash and reduce deposit problems with the recycled (PCW) fiber.

Press section:
Suction pick-up
The press section felted from the pick-up to the third press
(2) 350 pli presses, both presses double felted.
3rd press 750 pli pressure roll, top felted.
Press and remainder of paper machine driven by DC sectional drive
Devron steam box equipped with automated cross machine (CD) profiling moisture control

Dryer:
(33) dryers - 5'diameter, rated at 30 psi
(3) thermocompressor steam sections
Unirun dryer configuration through the first 15 dryers, with top and bottom felts on the second drive section
Turbulator bars and S.S. in D2, 4, 6 and 8
Turbulator bars in D20 - 34.
(2) drive sections (electric drives)

Dryer section followed by a two-roll, Kuster controlled crown, calender stack.

Coaters:
Two (2) trailing blade Wartsila coaters, with I-R burners after each blade (coated side of sheet)
Two (2)Overly ovens follow each I-R burner, with second Overly on each on process control for sheet moisture
There are (3) ABB process control scanners.
Eurotherm drives on both coaters and pull stacks stabilize tensions through the sections.
Total coat weight for each blade is on process control.
Black Clawson horizontal reel

Rereeler:
Wartsila rereeler (installed 1978)
Maximum speed of 6000 ft/min
Equipped with scales for finished reel weight
Electric drive

Additional information is available.

Ref. No. BPMB51969