SPOTTI/VIGANO CUT TO LENGTH LINE YEAR 2003/8

Used Secondhand Spotti / Vigano Cut To Length Line
Technical Details:
Manufacturer Spotti / Vigano
Year Of Construction 2003 / 2008
Material Hot Rolled / P & O
Material Width Max. 2.000 Mm
Material Thickness 1,50 – 12,00 Mm
Cutting Capacity (2.000 X 12 Mm) St 37 / St 42
Tensile Strength (St 37 / St 42) (App. 360 – 500) N/Mm²
Coil Weight Max. 30,0 T
Coil Inside – Ø 500 – 800 Mm
Coil Outside – Ø 1.900 Mm
Sheet Length Max. 15.000 Mm
Stacking Weight Max. 7.500 Kg
Stacking Height Max. 500 Mm
Working Speed Approx. 30 M/Min.
Working Direction Right ⇒Left
Line Consisting Of:
Coil Car Under Floor (Movable)
Double Cone – Decoiler Spotti
Power 45,5 Kw / Each Side
Year Of Construction 2008
Coil Opener - / Driver Unit
(2-Hi – Roll Stand) With Fitting Frame And Press Roll (Driven)
Conveyor Table
Leveler 1 Manufacturer Spotti
Year Of Construction 2008
Power 168 Kw
4-Column-Construction With 4 Driver Units
Lifting / Lowering – Upper Block By The 4 Driver Units
No. – Levling Rolls 15 (7 X Above / 8 X Below)
Leveling Roll – Ø 110 Mm
No. – Supports 14 (7 X Above / 7 X Below)
No. – Support Rolls 14 (7 X Above / 7 X Below)
Height Adjustment – Upper Roll Block Motor Driven (See Above)
Support Roll Adjustment – Below Motor Driven (Gear Motor)
Conveyor – Roller Table
Brushing Unit Include Suction Device
Adjustment By Spindle – Power 15 Kw
Conveyor – Roller Table
Leveler 2 Manufacturer Vigano
Year Of Construction 2003
Power 138 Kw
4-Column-Construction
Lifting / Lowering – Upper Block By 2 Pc. Transfer Gear Box
No. – Leveling Rolls 17 (8 X Above / 9 X Below)
Levling Roll – Ø 48 Mm
No. – Supports 14 (7 X Above / 7 X Below)
No. – Support Rolls 9, Each Support
Height Adjustment – Upper Roll Block Motor Driven (See Above)
Support Roll Adjustment – Above By Upper Block
Support Roll Adjustment – Below Motor Driven (Gear Motor)
Measuring Beam With Measuring Wheel Mounted On
Machine Construction (Run Out Side – Leveler)
Cutting Shear Manufacturer Spotti
Year Of Construction 2008
Construction Flying Shear
Accelerator Belt 1 With Mounted Scrap Switch
Accelerator Belt 2
Driver-Unit (2-Hi – Roll Stand)
Upper Roll Pneumatically Adjustable
Stacking Unit Manufacturer Spotti
Year Of Construction 2008
No. – Scissors Lift 2
With Constructed Chain Conveyor Unit
Side „Pushing“ By Transfer Gear Box And Connecting Shaft
No. – Run Out Chain Conveyor Units 4
(Chain Conveyor Unit 1 With Scale)
Electric Esa Control, Control Techniques, Emerson Drive
Hydraulic
Spare Parts

Ref. No. BPMB31925