MAQUINARIA BONAK SA CUT TO LENGTH LINE

Used Secondhand Bonak 2550mm X 26mm X 40,000 Kg Cut-To-Length Line
Manufacturer Maquinaria Bonak SA, Oiartzun–San Sebastian, Spain
Year of Manufacture 2009
Model 255-266-LA
Coil Width Max. 2550mm Min. 1550mm
Thickness Max. 26mm Min. 6mm
Plate length Max. 17m Min. 2m
Material Max. 700 N/mm2 – 500 N/mm2 Min. 410 N/mm2 – 275 N/mm2
Max. Coil Weight 40,000 kg
Coil I.D. 760mm and 850mm
Coil O.D. Max. 2200mm Min. 1500mm
Speed
13–26mm 0 – 10 m/min
6–13mm 0 – 20 m/min
Passline Height 1200mm
COMPRISES
3 Coil Capacity Ramp
Coil Rotating Facility
Pit Type Coil Car
Decoiler
Model: 255-40-DDH
Twin Mandrel Type
Hydraulic Traverse
Hydraulic Expansion
Drive: 75 kW AC, 1478 RPM, 400V, 3 Phase, 50 Hz Per Head
Snubber Roll
Feed-In Equipment
Type: 255-266-AP
Coil Peeler
Pinch Roll
3-Roll Pre-Straightener
Drive: 150 kW AC, 990 RPM, 400V, 3 Phase, 50 Hz
Automatic Centering Device
Shear
Model: 255-266-CGH
Drive: 79 kW AC
Edge Trimming Shears
Drive: 250 kW AC, 992 RPM, 400V, 3 Phase, 50 Hz
Max. Edge Trim: 500mm (1 side only)
25mm Must be removed from each side
Scrap Chopper
Drive: 90 kW AC, 980 RPM, 400V, 3 Phase, 50 Hz
Scrap Conveyor
Falttener 1
Model: 255-11-27-AF-1
No. of Straightening Rolls: 11
Roll Configuration: 5 over 6
Roll Diameter: 270mm
Drive: 300 kW AC
992 RPM
400V
544 Amps
3 Phase
50 Hz
Roll Cleaning Device
Flattener 2
Model: 255-11-150-AF2
No. of Straightening Rolls: 11
Roll Diameter: 150mm
Roll Configuration: 5 over 6
Drive: 250 kW AC
1490 RPM
400V
430 Amps
3 Phase
50 Hz
Roll Cleaning Device
Hydraulic Flying Shear
Type: 255-266-CGHV
Drive: 150 kW AC & 37.2 kW AC
Scrap Car
Belt Type Evacuation Table
Run-out Table
Stacker 1
Stacker 2
Finished Pack Receiving Table
Weighing Facility
Hydraulic Packs
Control Pulpits
Main Electrical Cabinets
Emerson/Control Techniques Unidrive SP6 Drives
Some Spares – (3) 270mm Flattener Rolls
(1) 150mm Flattener Roll
Shear Blades

Ref. No. BPMB31920