COLD ROLLED STEEL 60" (1500MM) X 6MM X 40,000# AKV LOOP CAPSTAN SLITTING LINE WITH PACKAGING

Used Secondhand 60" (1500mm) x 6mm x 40,000# AKV Loop Capstan Slitting Line with Packaging
Material: Cold Rolled Steel, max 450 N/mm2
Max. Coil Weight: 20 Tons
Max. Coil OD: 1900mm
Coil ID Range: 475mm - 620mm
Strip Thickness: 0.5mm - 6mm
Strip Width: 200mm - 1500mm
Line Speed: 0 - 140 m/min
Line Direction: Left to Right

Complete Line with the Following Components:

Entry Coil Car
Manufacturer: C.M. AMEK & SVETS
Year: 2002
Max. Coil Weight: 20 Tons
Hydraulic-Mechanical Lift
Hydraulic Motor/Pump/Reservoir
Travel on Rails by Electric Motor Drive through Gear Reducer

Mandrel Uncoiler
Manufactured Original: 1992
Rebuilt by TESI: 2009
Max. Coil Weight: 20 Tons
Max. Coil OD: 1650mm
Mandrel ID Range: 475mm - 620mm
Mandrel Face: 1600mm
DC Motor Drive: 23.5 KW, 400 Volt, 530-2104 RPM
Hydraulic Expansion
Traverse
Snubber Roll with Hydraulic Motor

Peeler Table/Coil Opener
Hydraulic Operation

Side Roller Strip Guide
Manufacturer: AKV ESSVERK
Year: 2002
Handwheel Adjustment

3 Roll Strip Straightener
Manufacturer: AKV ESSVERK
Year: 2002

Operator’s Pulpit Control Panel

Hydraulic Power Station
Manufacturer: Hydraulik Leverantoren
Dual Motors - Pump & Reservoir
(2) 22 KW Motors: 400 Volt, 50 Cycle, 880 RPM / 28 KW @ 440-480 Volt, 60 Cycle, 1175 RPM

Crop Shear
Rotary Traverse Type
Manufacturer: AKV
Year: 2002

Slitting Head
Manufacturer: AKV ESSVERK
Year: 2002
Shaft Diameter: 240mm
Drive Motor, 55 KW, 690/400 Volt, 50 Cycle, 1455 RPM / 63 KW @ 440 Volt, 60 Cycle, 1775 RPM
Tooling Quick Change Push-off Plate
Hydraulic Operation

Tooling Prep Station
2 Arm Turret
Travel by Hydraulic Cylinder

(2) Scrap Winders
Manufacturer: AKV ESSVERK
Year: 2002

Main Operator’s Pulpit Control Panel

Pit with Carry Over Tables

Tension Stand
Manufacturer: AKV ESSVERK
Year: 2002
Pressure Pad Type

Recoiler
Manufacturer: NOVASTILMEC
Year: 2008
Overarm Separator
Gripper
Push-Off Plate
Drive Motor: 190 KW, AC

20 Ton Exit Coil Car
Manufacturer Rebuilt: 2002 by TESI

Control Cabinets
AC Variable Frequency Drive (Slitter & Recoiler)
Mitsubishi PLC
ABB ACS 600 DC Motor Drive (Uncoiler)

2 Arm Turnstile
Manufacturer: AKV
Year: 1990
Rebuilt By ESSVERK AKV in 2000

Packaging Line including the following:

Tilting Roller Table
Manufacturer: ITALIMPIANTI
Rebuilt by TESI in 2015
Length of Table: 2000mm
Width of Table (Roll Length): 1600mm
Hydraulic Operation

Straight Roller Table
Length of Table: 2500mm
Width of Table (Roll Length): 1850mm

Rotating Roller Table
Table Diameter: 1500mm

Traveling Overhead Magnetic Lift
Manufacturer: SGM
Length of Travel: 12 meters
Coil Width: 450mm
Coil ID: 508mm-620mm
Coil OD: 1550mm
Lift Capacity: 4000 Kg
(4) Stacking Stations

Siemens Flat Screen Controls

Large Assortment of Tooling, Spacers & Knives

Knives Pieces
358 x 20 mm 20
350 x 20 mm 97
324-327 x 20 mm 120
318 x 20 mm 4
322 x 12,5 mm 137

Spacers
280 x 1,00 mm 30
280 x 1,025 mm 4
280 x 1,05 mm 40
280 x 1,10 mm 35
280 x 1,15 mm 39
280 x 1,20 mm 32
280 x 1,25 mm 41
280 x 1,50 mm 39
280 x 1,75 mm 40
280 x 2,00 mm 30
280 x 3,00 mm 30
280 x 4,00 mm 27
280 x 5,00 mm 25
280 x 10,00 mm 28
280 x 12,50 mm 30
280 x 25,00 mm 30
280 x 50,00 mm 30
290 x 1-10 mm, 1700 mm in total length
290 x 20 mm 38
290 x 40 mm 43
290 x 80 mm 44

Rubber drivers
346 x 20 mm red 48
346 x 20 mm green 50
346 x 20 mm yellow 52
320 x 12.5 mm red 59
320 x 12.5 mm green 60
325 x 12.5 mm yellow 33

Currently Installed

Ref. No. BPMB3194