MELTING AND ROLLING PRODUCTION LINE FOR PRODUCTION BRAS AND COPPER PLATE AND STRIP COIL

 

 

Used second hand Melting And Rolling Production  Line For Production Of Brass And Copper Plate And Strip Coil
 
(1)   Production scale

1.     Product type for the production: Brass and copper plate and strip coil product
2.     Production size: Thickness 0.2mm×Width 300mmW×Coil Unit weight 1,000 kg / Coil
3.     Production capacity: 250 Tons per month
 
(2)   Specification of production facility

1.     Chip Compactor – 1 Set
 
•        Maker: Nicotec <Japan>
•        Type: Model: CCP-100H
•        Year: 2005
•        Capacity: 2~4ea/min
•        Chip Weight: 2kg/ea
•        Pressure: 103 ton
•        Hyd unit: 5.5kw
•        With Hopper
•        With Std. Acc
 
2.     Melting Furnace and H.C.C Line – 1 Set
 
①       High-Frequency Induction Melting Furnace
•      Maker: Boolee therm furnace <Korea>
•        Type: Crucible Tilting type
•        Year: <Unknown>
•        Capacity: 500kg
•        Temperature: 1250℃
•        Frequency: 3Ø400V 60Hz / 1Ø 1200V 3KHz
•        Power: 220Kw, 250KVA
•        Control Box
•        With Std. Acc
 
②       Low-Frequency Induction Melting Furnace (Holding)
•        Maker: UIE
•        Type: Channel type
•        Year: 1999
•        Capacity: 1300kg
•        Temperature: 1250℃
•        Frequency: 3Ø380V 60Hz / 1Ø 400V 60Hz
•        Power: 120Kw, 140KVA
•        Control Box
•        With Std. Acc
 
③    Horizontal Continuous Casting Line
•        Maker: <Korea>
•        Type: Horizontal type×2 Continuous
•        Year: <Unknown>
 
1) Withdraw m/c
•        Capacity: (t)15mm×(W)400mm
•        Roller: Ø120×500mm x 2ea x 2set
•        Hydraulic type
•        Gear Reducer
 
2) Cutting m/c
•      Air Cylinder×2ea
•        Guide Roller
•        Circular Saw
•        Motor: 15Kw
•        Transport Car Rail: 680mm
•        With Std. Acc
 
3.     Melting Furnace and H.C.C Line – 1 Set

①    Low-Frequency Induction Melting Furnace
•        Maker: UIE
•        Type: Crucible Tilting type
•        Year: 2001
•        Capacity: 1000kg
•        Temperature: 1000℃
•        Power: 250Kw, 300KVA
•        Controller: PLC type
•        With Std. Acc
 
②    High-Frequency Induction Melting Furnace
 
•        Maker: Hanmi Electric Ro <Korea>
•        Type: Crucible Tilting type
•        Year: 2012
•        Capacity: 1000kg×2 set
•        Temperature: 1250℃
•        Power: 350Kw, 500KVA
•        Cooling tower
•        Hydraulic system
•        Controller
•        With Std. Acc
 
③    Low-Frequency Induction Melting Furnace (Holding)
 
•        Maker: UIE
•        Type: Channel type
•        Year: <Unknown>
•        Capacity: 1000kg
•        Temperature: 1000℃
•        Power: 75Kw, 90KVA
•        Controller
•        With Std. Acc
 
④    Horizontal Continuous Casting Line
 
•        Maker: <USA>
•        Type: Horizontal type×2 Continuous
•        Year: <Unknown>
 
1) Withdraw m/c
 
•      Capacity: (t)15mm×(W)400mm
•      Roller: Ø120×500mm×2ea×2 set
•        Hydraulic type
•        Gear Reducer
 
2) Cutting m/c
 
•        Air Cylinder×2ea
•        Circular Saw
•        Stroke: 500mm
•        Transport Car Rail: 520mm

3) 3-Coiler
 
•        Roller: Ø 130×500mm×5ea
•        With Std. Acc
 
4.     Leveler Surface ( One Way Scalping Machine)
 
•        Leveler Roll: 250mmØ×500mmW×5 Set
•        Motor: 37 Kw+11 Kw Gear Box
•        Universal Joint×5 Set
•        Press Roll: 300mmØ×500mm
•        Scalping Roll: 125mmØ×500mm
•        Control Box
 
5.     4-High Break Down Cold Rolling Mill
 
①    4-hi Break Down Rolling Mill – 1 Set
 
•        Maker: Shinhung <Korea>
•        Type: Non-Reverse type
•        Year: 1998
•        Working Roll: Ø220×480mm×2ea
•        Back up Roll: Ø500×480mm×2ea
•        Main Motor : DC 185kw Gear Box
•        Universal Joint×4 Set
•        Feeder
•        Roll Conveyor: (W)460×(L)2400mm
•        Feeding Roll Stand: 22kw
•        Lubricant & Cooling unit, Control Box ② 3-Up Coiler
•        Maker: Shinhung <Korea>
•        Type
•        Year: <Unknown>
•        Working Roll: Ø130×500mm
•        Main Motor: DC 22kw Gear Box
•        Control Box
•        With Std. Acc
 
6.     4 High Intermediate Rolling Mill – 1 Set
•        Maker: Shinhung <Korea>
•        Type: Non-Reverse type
•        Year: 1991
•        Working Roll: Ø140×360mm×2ea
•        Back up Roll: Ø320×360mm×2ea
•        Main Motor: DC 110kw Gear Box
•        Uncoiler: Disk Break type
•        Recoiler: DC 35kw
•        Lubricant & Cooling unit
•        Control Box
•        Uncoiler: Width 300mm

7.     4 High Finishing Rolling Mill – 1 Set
•        Maker: Shinhung <Korea>
•        Type: Non-Reverse type
•        Year: 1991
•        Working Roll: Ø140×360mm×2ea
•        Back up Roll: Ø140×320mm×2ea
•        Main Motor: DC 110kw Gear Box
•        Uncoiler: Disk Break type
•        Recoiler: DC 22kw
•        Lubricant & Cooling unit
•        Control Box
•        Side Trimming
•        Uncoiler: Width 300mm
•        With Std. Acc
 
8.     Bell Type Annealing Furnace
 
①    Bell Furnace (Electric Annealing Furnace) – 1 Set
•        Maker: Jelim Eng. <Korea>
•        Type: Bell type
•        Year: <Unknown>
•        Capacity: 12 ton
•        Size: Ø2400×1200mm
•        Heater: 200Kw
•        Cover: Ø2400×2250mm
•        Controller
•        With Std. Acc
 
②    Bell Furnace (Electric Annealing Furnace) - 1 Set
•        Maker: <Unknown><Korea>
•        Type: Bell type
•        Year: <Unknown>
•        Capacity: 3 ton
•        Size: Ø1450×1200mm
•        Heater: 60Kw
•        Cover: Ø1450×1300mm
•        Controller
•        With Std. Acc
 
③    Bell Furnace (Electric Annealing Furnace) - 1 Set
•        Maker: Daehanheating manu'f <Korea>
•        Type: Bell type
•        Year: <Unknown>
•        Capacity: 3 ton
•        Size: Ø1450×1200mm
•        Heater
•        Cover
•        Controller
•        With Std. Acc
 
9.     Pickling and Clearing Line – 1 Set
•        Maker: <Korea>
•        Type
•        Year: <Unknown>
•        Working Width: 400mm
•        Working Speed: 9m/min
•        Uncoiler: 1 ton
•        Acid Tank: SUS304-W450×180×2000mm -Heater
-Roller: 300mm×450mm
•        Clearing Tank: SUS304-W500×50×2000mm -Brush Roller
-Shower
•        Motor: 5.5kw
•        Dry Chamber: 300×500×700mm
-Heater: 5kw
-Fan: 0.4kw
•        Water tank: 1950×900×1200mm
•        Coiler
•        Hyd' type Car
-Capacity: 1 ton
•        Spot Arc Auto Welder
•        With Std. Acc
 
10.  Leveler – 1 Set
•        Maker: Shinhung <Korea>
•        Type
•        Year: 1999
•        Leveler Roll: Ø100×500mm×9 Set
•        Main Motor: DC 22kw Gear Box
•        Universal Joint×4 Set
•        Control Box
•        With Std. Acc
 
11.  Slitter Line
 
①    Slitter – 1 Set
•        Maker: <Unknown>
•        Type
•        Year: <Unknown>
•        Working Width: 450mm
•        Leveler
•        Leveler Roller: (W)500mm
3.7Kw
•        Uncoiler
•        Capacity: 1 ton
•        Knife Roller: Ø150mm
 
VS Motor 5.5Kw
•        Unwinder: Ø850mm
•        With Std. Acc
 
②    Slitter – 1 Set
•        Maker: Samwhasa <Korea>
•        Type
•        Year: <Unknown>
•        Working Width
•        Leveler
•        Leveler Roller
•        Looping Zone: 1000×1900mm
•        Uncoiler
•        Capacity
•        Knife Roller
•        Unwinder
•        With Std. Acc
 
12.  Shearing Machine
 
① Shearing - 1 Set
•        Maker: Jail <Korea>
•        Type
•        Year: <Unknown>
•        Working Width: 2500mm
•        Motor: 15 kw
•        With Std. Acc
 
②    Shearing - 1 Set
•        Maker: <Korea>
•        Type
•        Year: <Unknown>
•        Shearing Thickness: 4.5mm
•        Working Width: 1900mm
•        Motor: 3.7 kw
•        With Std. Acc
 
③    Shearing - 1 Set
•        Maker: MATUEIKIKAI
•        Type
•        Year: <Unknown>
•        Shearing Thickness: 6mm
•        Working Width: 2400mm
•        Motor: 3.7 kw
•        With Std. Acc
 
13.  Dust Collector – 1 Set ① Fume Collector
 
•        Maker: <USA>
•        Type: Air Pulse type
•        Year: <Unknown>
•        Capacity: 300m3/min
•        Size: 4800×3000×5500mm
•        Bag filter
•        Fan: 37kw
•        Screw Conveyor: Ø180×5000mm
-Rotary Valve: 0.4kw
•        Cyclone: 1900×1900×2000mm
-Rotary Valve: 0.4kw
•        Air Compressor -Cylinder: 37kw
•        Duct & Acc.
 
14.  Laboratory
 
①    Emission Spectrometer
•        Maker: SHIMADZU
•        Model: GVM-514S
•        Year: <Unknown>
•        With Std. Acc
 
②    Tensile strength tester
 
•        Maker: Kyoungsung testing <Korea>
•        Capacity: 20 ton
•        Year: 2005
•        With Computer
•        With Std. Acc

15.  Bacty Type Annealing Furnace
 
16.  Milling Machine and Lathe

 

 

Ref. No. BPMB818160